# Guest Wi-Fi: Configuring with an existing Wi-Fi system (Omada) **URL:** \ **Category:** Networking\ **Tags:** mikrotik\ **Created:** [March 16, 2026, 3:10pm UTC](https://forum.powerlynx.app/t/guest-wi-fi-configuring-with-an-existing-wi-fi-system-omada/170 "2026-03-16T15:10:43Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![Rob-CTL](https://forum.powerlynx.app/letter_avatar_proxy/v4/letter/r/eb8c5e/32.png) [@Rob-CTL](https://forum.powerlynx.app/u/Rob-CTL)\ **Post date:** [March 16, 2026, 3:10pm UTC](https://forum.powerlynx.app/t/guest-wi-fi-configuring-with-an-existing-wi-fi-system-omada/170/1 "2026-03-16T15:10:43Z")
Hi, Scenario: We have three large outside open area sites that are currently providing Wi-Fi for staff via TP-Link Omada, given the size of the site there are multiple bridge access points and standard access points. The intention it to provide a new paid service that customers can purchase Wi-Fi for a set period of time i.e. 12,24,48,72 hours. We don’t want to have to rip out the current Wi-Fi hardware as there has been a large investment here. Questions: I understand that you don’t directly support the Omada system or its portal service but you do support Mikrotek. If were to swap out the current router for a Mikrotek and configure it to talk to PowerLynx would this work with our current solution? I guess the question here is if the MikroTek portal will work correctly with the Omada, I have very little knowledge of MikroTek so I don’t know what is/isn’t possible with the device. The internet is provided by a Starlink connection, does the PowerLynx service require the MikroTek router to have a static IP address? As mentioned, we have 3 sites that will be using the service, how does the licensing work in this situation? Do we need multiple instances of the PowerLynx service or can all three sites be serviced by one? Thanks Rob ---
**Author:** ![alex\_koskov](https://forum.powerlynx.app/letter_avatar_proxy/v4/letter/a/ea666f/32.png) [@alex\_koskov](https://forum.powerlynx.app/u/alex_koskov)\ **Post date:** [March 17, 2026, 9:25am UTC](https://forum.powerlynx.app/t/guest-wi-fi-configuring-with-an-existing-wi-fi-system-omada/170/2 "2026-03-17T09:25:30Z")
Hello Rob, Thank you for reaching to Powerlynx forum. I’m Alex, Support Engineer at Powerlynx. ### Regarding MikroTik, TP-Link Omada, and Starlink Integration In your scenario, the recommended logical network topology is as follows: **Powerlynx (Cloud) → Hotspot Controller (MikroTik) → Access Points (TP-Link Omada)** - **Access Points (AP):** These act as wireless stations for end users, forwarding all traffic to the MikroTik hotspot controller. - **Hotspot Controller:** A MikroTik device connected to both Powerlynx and the local network. It is responsible for intercepting unauthorized traffic and redirecting users to the Powerlynx Splash Page. In this setup, **Starlink** serves as the primary WAN gateway for the MikroTik device. - **Powerlynx:** Provides AAA (Authentication, Authorization, and Accounting) services. It instructs the MikroTik controller on session management, including when to allow, throttle, or disconnect specific users. ### Visual Network Topology This is a diagram representing this architecture for your reference: ![Gemini_Generated_Image_upxl09upxl09upxl](https://forum.powerlynx.app/uploads/default/original/1X/dcd7b49fecb44fe38fbb24da143eda1a8a61d0c7.jpeg) ### Example Configurations: - [MikroTik Controller with AP connected via VLAN](https://forum.powerlynx.app/t/mikrotik-controller-with-ap-connected-via-vlan-interface/75) - [Simple Setup: MikroTik Hotspot Controller with Access Points](https://forum.powerlynx.app/t/mikrotik-hotspot-controller-with-access-point-device-simple-setup/128) * * * ### Licensing and Scalability **Question:** _We have 3 sites that will be using the service; how does the licensing work? Do we need multiple instances or can all three sites be serviced by one?_ Powerlynx licensing is based on **concurrent online users (sessions)** rather than the number of physical network sites or controllers. You do **not** need multiple Powerlynx instances. All three of your sites can be managed from a single Powerlynx instance, allowing for centralized management of your data plans, customers, and vouchers across all locations. * * * ### Next Steps You can register for a trial session and begin testing immediately: - **Trial Registration:** [https://powerlynx.app/](https://powerlynx.app/) - **Getting Started Guide:** [https://docs.powerlynx.app/getstarted.html](https://docs.powerlynx.app/getstarted.html) **Additional Resources:** - **Official Website:** [https://powerlynx.app/](https://powerlynx.app/) - **Documentation:** [https://docs.powerlynx.app/](https://docs.powerlynx.app/) - **Community Forum:** [https://forum.powerlynx.app/](https://forum.powerlynx.app/) If you need further assistance, feel free to reach out to us at **[support@powerlynx.app](mailto:support@powerlynx.app)**. ---
**Author:** ![Rob-CTL](https://forum.powerlynx.app/letter_avatar_proxy/v4/letter/r/eb8c5e/32.png) [@Rob-CTL](https://forum.powerlynx.app/u/Rob-CTL)\ **Post date:** [March 17, 2026, 12:42pm UTC](https://forum.powerlynx.app/t/guest-wi-fi-configuring-with-an-existing-wi-fi-system-omada/170/3 "2026-03-17T12:42:53Z")
Hi Alex Thanks for the compressive reply. Can I just confirm that I don’t need a static IP address on the WAN link? I am guessing that PowerLynx will be the VPN host and the MikroTek the client? Thanks Rob ---
**Author:** ![alex\_koskov](https://forum.powerlynx.app/letter_avatar_proxy/v4/letter/a/ea666f/32.png) [@alex\_koskov](https://forum.powerlynx.app/u/alex_koskov)\ **Post date:** [March 17, 2026, 1:09pm UTC](https://forum.powerlynx.app/t/guest-wi-fi-configuring-with-an-existing-wi-fi-system-omada/170/4 "2026-03-17T13:09:34Z")
Hi Rob, Yes, you are correct. You do not need a static IP address if you are using a VPN. Best regards, Alex ---
**Author:** ![Rob-CTL](https://forum.powerlynx.app/letter_avatar_proxy/v4/letter/r/eb8c5e/32.png) [@Rob-CTL](https://forum.powerlynx.app/u/Rob-CTL)\ **Post date:** [March 17, 2026, 1:58pm UTC](https://forum.powerlynx.app/t/guest-wi-fi-configuring-with-an-existing-wi-fi-system-omada/170/5 "2026-03-17T13:58:34Z")
Thanks for the help 👍